LED T8 Tube PCB Depanelizer For LED PCB Separator With Six Circular Blades
1. It is quite suitable for aluminum board.
2. It can cut the board without warping.
3. The stress is very low when cut board.
CAB PCB Depanelizer MAESTRO 4M YES-6 PCB Depaneling Machine Features:
| Voltage : | 110V / 220V |
| Certificates: | CE Mark |
| Weight : | 85 Kg / 98 Kg . |
| Platform length: | 1.5 M / 2.4 M |
| Cutting Board : | v-cut pcb board , FR4 board . LED Aluminum board |
| Dimension: | 958*506*333mm / 1020*506*333mm |
| Cutting Speed : | 80,120, 200, 400mm/s |
| Cutting Thickness: | 0.2-5mm |
| Voltage: | 230V/50Hz(110V/60Hz) |
| Power: | 40W |
Aluminium PCB Cutter Machine Features:
1. Unique PCB Separation method by three times cutting twisted,Threee pair of blades can guarantee the aluminum plate without deformation and damage after cutting.
2. Due to three times cutting, cutting process is smooth and can locate v cut very well to avoid v-cut jumping out.
3. can ensure rear and front blades cut same places of the v cut. Perfect cutting effect.
v cut pcb depaneling Production Introduction :
1. With unique cutting method , the circuit board is cut by six blades . It is a group composed of one upper
and one lower blade , and is also a cutting unit. There are A, B, C, three groups. The whole cutting
process is divided into three stages from group A blade which cut 40% board then to the group B blade
knife cut through groove cutting by group A to complete another 40% .the last 20% is cut by group C
blade and finishing. because each cutting volume is small, the stress produced during the cutting
progress declined by more than 80% compared with the traditional cut off at a time. Thus the edge of the
board and its surface are very smooth without warping . Currently, it is the only machine that can
guarantee the aluminum plate without deformation after cutting .
2. because of the multiple cutting, cutting process is very smooth and greatly improves the capability of
position of V-CUT groove . Even if with shallow slot V-CUT groove the board won t jump out of blade,
avoiding adverse.
Our Service
| 1. Engineers available to service machinery oversea Engineers are available to be sent to freign countries to do machinery training and offer technical support. |
| 2. Mature technique & forerunner to process makes high quality machinery As largest manufactory in South China, we have 12 years experience on machines. Our R&D team continuously upgrade the existing machines to meet the market development trend |
| 3. Effective customer service All of us together are stronger and wiser than any one of us individually. To succeed, we must assume responsibility, cooperate with fellow associates and with departments, effectively comminicate with one another, foster enthusiam and participate in decision-making. To be seay reachable by customers and provide prompt replies to solve their problems and create value for customers |
|
|
LED T8 Tube PCB Depanelizer For LED PCB Separator With Six Circular Blades Images
|
